bg en ru mk ro

Product 9/19

DEKORATOR VARNISH WATER-SOLUBLE ALKIDE

DEKORATOR VARNISH WATER-SOLUBLE ALKIDE

Произвежда се по каталог на фирмата

Color Range
Произвежда се по каталог на фирмата
Surface
wood
Gloss level
satin
Application
DIY
Use
interior / exterior
Consumption
80 - 100 ml/m2
Thinning
if necessary up to 5% with water
Completely dry
3h
Application tools
roller, brush or spray gun
Application temperature
above 10˚C
Storage temperature
above 5˚C

Cleaning of tools
water, immediately after work

Consumption calculator


Processing area (m2):
  • Description
  • Documents

One-component aqueous varnish based on modified alkyd-urethane emulsion, specific additives and colorants.

 

APPENDIX
For interior and exterior use. Varnishing of garden furniture, joinery, fences, cladding, paneling, interior furniture, railings, gazebos, villas, porches, decorative elements and more.

 

ADVANTAGES
• long-term protection against atmospheric influences and UV rays;
• very good coverage and spillage;
• permanent antibacterial action with silver ions;
• allows easy penetration into the wood and protection in depth;
• the coating has a satin sheen;
• dries faster than standard alkyd products;
• suitable for surfaces of all wood species;
• has excellent adhesion and elasticity, resistant to deformation due to changes in temperature;
• lacquered surfaces do not change color over time and are resistant to weathering;
• suitable for machine tinting;

 


BASIC REQUIREMENTS
The substrate must be sound, dry and well cleaned of dust, grease and other contaminants.
• New wood - impregnation with AQUIS Wood Impregnator or DEKORATOR Wood Impregnator is recommended, which penetrate the wood, protect it from pests and create a good base for applying a decorative layer.
• Treated wood - old, damaged coatings should be removed and unevenness filled and leveled with appropriate sandpaper. Already painted or varnished surfaces are not primed, but only sanded before applying a decorative layer.

 

WAY OF WORKING
Apply in one or two coats with a brush, roller, or paint spray gun. Each subsequent layer is applied after the final drying of the previous one. For best results, it is recommended to work at a temperature of 35 0C and a relative humidity of 60%. Do not apply on wet surfaces.