AQUIS Facade Quartz Paint
Consumption calculator
- Description
- Documents
High quality water-repellent facade paint with silicone resin for decoration and protection of external walls.
APPENDIX
Suitable for new and old buildings - homes, shops, offices, hotels, schools, kindergartens and other public buildings. It is used for decorative protection of facades, lime-sand plasters and walls, concrete, cement and lime-cement surfaces exposed to atmospheric influences.
ADVANTAGES OF THE PRODUCT
Creates a strong, long-lasting, resistant to weathering and pollution coating, thanks to special Teflon® additives;
Increased degree of water repellency due to the presence of quartz particles. The specific microtexture of the surface and the silicone resin create conditions for the water that has fallen on it as a result of rain or dew to flow and wash away the particles from the polluting environment, leaving the facade relatively dry and clean;
High coverage and very good flow;
High vapor permeability, allowing the wall to "breathe".
BASIC REQUIREMENTS
The substrate must be dry and well cleaned of dust, grease and other contaminants. Damaged surfaces are filled and cured, and for porous surfaces the use of a curing primer is recommended.
- new bases - recommended priming with Xpert Universal Wall Primer or Dekorator Nanoprint deep penetrating to create a strong, flat and smooth surface, which is a good base for applying a top coat.
- old bases - lines, damaged coatings, should be removed to a solid base, and the irregularities should be filled and leveled, and then primed with the above primers.
WAY OF WORKING
Application of the product - depending on the preliminary preparation of the surface, apply one or two coats with a brush, roller or paint spray gun. The interval between each subsequent layer is about 3 hours, after complete drying of the previous one. For
the best result is recommended to work at a temperature of 350C and relative humidity of 60%.
Do not apply on wet surfaces